Gentle Monster MM211 01
MM211 01 is our core-black execution of the MM211 silhouette. This clean, rectangular frame features decisive lines characteristic of our Rococo collection. The 01 code marks deep black, authenticated by our gentlemonsterrococo.com team. Each unit undergoes two-gate QC for data and build verification before listing.
Technical Characteristics
- Size: Medium (52-20-145)
- Color: Black (01)
- Condition: New, Authenticated
- Price with Shipping: $620 + Free Shipping
🔐 Authenticated
Two-gate verification confirms maker data and build integrity before listing approval.
Measurements
- Lens Width: 52mm
- Bridge Width: 20mm
- Temple Length: 145mm
- Frame Width: 138mm
- Lens Height: 42mm
We ship tracked and protected, with handling that prioritizes safe transit and clean documentation. The goal is simple: the frame arrives in the same condition you saw in our studio set.
Returns are accepted under our tamper-seal standard. Keep the seal and full kit intact and the item in return-ready condition, and our team will process after a quick check. If a defect slipped past our QC, we elevate it to a fault case and fix it fast.
Treat it like a precision piece. Use a microfiber cloth and lukewarm water for the frame; avoid solvents, alcohol wipes, and abrasive towels.
Keep it out of high heat and store it in the case when not in use. Any small temple or bridge tweak should be done with controlled, low heat by a trained hand to protect the finish and hinge integrity.
Expect a balanced, rectangular wear with a modern line. The bridge fit matters most; our unit-level sheet prioritizes bridge notes and temple curve over vague "face size" talk.
We measure each unit against the same standard so your fit reads true across adjacent models. If MM211 01 works for you, nearby codes in the same family usually line up within a tight tolerance.
We want you secure when you buy through gentlemonsterrococo.com. Qualifying orders fall under our Purchase Protection in the rare event something goes wrong.
Your order is covered if the item you receive materially differs from what we described in color, condition, materials, or measurements; if you receive the wrong item; or if our team cannot verify the item's authenticity. When a claim is validated, we resolve it with pragmatism and speed.
Tags
Gentle Monster MM211 01 — Black 01, verified and ready
MM211 01 is our core-black execution of the MM211 silhouette. Price is $620, stock is live, and the unit is authenticated by our gentlemonsterrococo.com team before listing.
This is a clean, rectangular frame with the decisive lines we label under Rococo. The 01 code marks deep black; we keep code-first naming so you always know what you are getting.
What is MM211 01, in one line?
A black-01, rectangular Gentle Monster frame with a crisp profile, listed at $620 and vetted by our two-gate QC for data and build.
We keep it simple: code 01 for black, MM211 for the silhouette family, and a studio set that shows the true finish and interior marks. You get the exact unit that passed our checks, not a catalog promise.
Key facts our team verifies before the page goes live
We confirm the code and color match, the internal markings, and the build integrity. We then shoot neutral, daylight-balanced images to lock the color and gloss to what you will hold in hand.
Gate one is maker data: SKU syntax, interior stamps, barcode logic where present. Gate two is physical build: hinge behavior, alignment, frame balance, and lens seating. If anything is off, it never reaches this page.
How does MM211 01 differ from its nearest variants?
Same family, different color codes and price points. MM211 01 sits in black; GR tracks a gray tone; RC7 sits in the brown family; MM210 T6 is a sibling shape with its own code and price.
Use the table below to see price and color-code differences at a glance. We also show the computed price delta vs MM211 01 so you can choose by color and cost without guesswork.
| Model | Color Code | Data-Color from Card | Price (USD) | Delta vs MM211 01 (USD) |
|---|---|---|---|---|
| MM210 T6 | T6 | black | 580 | -40 |
| MM211 01 | 01 | black | 620 | 0 |
| MM211 01 GR | 01 GR | gray | 640 | 20 |
| MM211 RC7 | RC7 | brown | 590 | -30 |
Why we place MM211 01 in our Rococo lane
It fits the rule: sculpted lines, minimal front, and a future-forward finish that wears clean daily. Black 01 stays sharp under neutral light and does not distract from the silhouette.
Our Rococo tag is a signal, not fluff. It filters frames with the same design DNA so you can compare like with like faster and pick on shape and color rather than noise.
What do you actually get with this listing?
You get the authenticated frame, photographed as listed, plus the factory kit where supplied: case, cloth, inserts, and cards. We log the codes we see so chain-of-custody is clean.
Your pack includes a copy of our spec snapshot with color code, QC date, and notes. This is how we keep the naming honest across restocks and how we match any follow-up questions to the exact unit.
How do we verify authenticity for MM211 01?
We run a two-step check: maker data, then build. We do not trust boxes alone and we do not list on faith.
Data means internal marks, code logic, and any etched tells checked against our reference set. Build means hinge torque, alignment, and frame balance examined under magnification. If it fails, it gets pulled and documented as non-listable.
Visual and build notes from our studio set
We shoot on a calibrated, daylight-balanced profile so black reads black and finish stays true. We include macro crops of the interior marks, hinge area, and arm tips to map the exact cues on your unit.
If a code appears on the interior—such as 01—it will be visible in the gallery along with our log date. That is how we keep the naming tight across restocks and how we cut confusion across markets.
Related codes and how to navigate them
01 is black. GR signals the gray family. RC7 maps to brown. If you are tracking gray executions in our system, see our reference entry for gentle monster rococo kc6 to understand how we lock code names to studio color.
We keep the maker's code intact and pair it with plain-English color notes from our own light. That way, the words and the photos agree.
Frequently Asked Questions
Yes. In our system, 01 is the core black color code, and the product card confirms it as black at the data layer.
We log unit-specific measurements and fit notes and include the spec snapshot with your pack. Our internal standard keeps sizing consistent across this silhouette and adjacent lanes.
Same silhouette family; the change is color code and price. 01 is black at $620, 01 GR is gray at $640, RC7 is brown at $590 per the current grid above.